Historical Test Reports

Historical Test Reports

BELOW ARE HISTORICAL TESTS FOR PRODUCT PREVIOUSLY SOLD AND ARE NOT APPLICABLE TO CURRENT PRODUCT.

NFPA 285

[1] Architectural Testing 2013 Test Report (4mm FR)
[2] Southwest Research Institute 2013 Test Report (6mm FR & 4mm FR)†
[3] Southwest Research Institute 2011 Test Report (4mm FR ZCM 0.5mm Skins) **

S134

 
[4] Intertek 2010 Test Report (2d ed. 2012) (4mm FR) 
[5] Intertek 2010 Engineering Evaluation Report (4mm FR) 
[6] Intertek 2018 Test Report (4mm FR) 

Sample E84 Test Reports

[7] Southwest Research Institute 2011 Test Report (6mm FR & 4mm FR)†

[8] Southwest Research Institute 2012 Test Report (4mm FR ZCM 0.5mm Skins - supported by rods and wire) **

[9] Intertek 2009 Test Report (4mm FR ZCM 0.5mm Skins - unsupported) **

[10] Omega Point Laboratories 2004 Test Report (4mm FR ZCM 0.7mm/.028 in. Skins - supported by rods and wire) **

** ZCM product currently not available for purchase from Arconic Architectural Products LLC.

† Section 1407 of the 2012 & 2015 (1406, of the 2018) International Building Code state that ASTM E84 and NFPA 285 testing should be performed on the thickest product intended for use. Tests performed on 6mm FR products validate both 6mm and 4mm FR panels, and tests of 4mm panels validate 3mm PE panels.