Reynobond® | Reynolux®

North America

Alcoa Reynobond® ACM Helps Make Creative Installation Solution Possible for Complex Design of the LEED® Platinum Duke Energy Center

16 August, 2012
Norcross, GA: The complex geometry incorporated into the design of the Duke Energy Center inspired the metal panel installers to develop an unconventional installation solution with Alcoa Architectural Products’ (AAP) Reynobond® Aluminum Composite Material (ACM). The newest landmark on the Charlotte skyline, Duke Energy Center is distinguished from its neighbors by a sculptural roofline with a sharply slanted, handle-shaped bridge at the crown and faceted, truncated corners on the tower. Duke Energy Center was designed according to the U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED®*) green building principles and achieved LEED Platinum certification for Core and Shell Rating System 2.0 in September, 2011.
Designed by tvsdesign, an Atlanta, Georgia-based architectural firm, the 50-story, 1,500,000-square-foot tower features 127,400 square feet of Reynobond ACM on the corner details, exterior  colonnades, recessed entry portals and roofline. To trim the “visual weight” of the building, the architects employed spandrel and vision glass. Reynobond ACM panels were also used to counterbalance the abundance of glass and to define the building corners and tapered crown element.
As the centerpiece of a cultural complex consisting of three museums and a performing arts center – all jewel-box size in comparison – the structure had to have enough detail at ground level to complement the neighboring edifices. The architects specified a combination of Pearl White Reynobond ACM and white Brazilian granite with stainless steel accents to create a neutral palette.
The complex geometry used in the design of the tower evolves as it reaches skyward. Reynobond takes on a prominent role at the 48th story where the glass walls begin to slope inward towards the crown. The building corners rise into the air beyond the angular glass façade and reconnect through a metallic bridge that forms a sweeping horizontal sky window extending 160 feet across.
An Unconventional Installation
“The combination of Reynobond’s rigid construction, light weight, high strength-to-weight ratio and superior flatness made it possible for the fabricator to create the complex geometric shapes that form the top of the building," said George Rosado, Commercial Director for Alcoa Architectural Products. “The geometry of the building allowed only limited access to the crown, so the installers literally rappelled down the façade like rock climbers, hanging off ropes suspended 786 feet in the air on a 72-degree incline to install the panels by bolting them to L-brackets on the substructure.”
The $880 million Duke Energy Center officially opened in September 2011. The structure was recognized by Siemens as the 2010 grand-prize winner in The Smartest Building in America ChallengeTM.
The architects specified Reynobond ACM, 4 mm, FR core with a Pearl White Colorweld 300XL finish. Batson-Cook Construction of Atlanta, GA, was the General Contractor, The Miller-Clapperton Partnership, Inc., of Austell, GA, was the panel fabricator and Juba Aluminum Products of Concord, NC, was the panel installer.
For more information about Reynobond materials, please contact the Alcoa Architectural Products manufacturing plant at 800.841.7774 or visit
*LEED is a registered trademark of the U.S. Green Building Council.


About Alcoa Architectural Products
As the leading manufacturer of exterior and interior cladding and corporate identity solutions for commercial construction, Alcoa Architectural Products (AAP) helps architects, designers, specifiers and installers achieve their design visions and groundbreaking ideas through its range of Reynobond® | Reynolux® products. In addition to classic Reynobond ACM, Reynobond Natural Metals and Reynolux panels and flat sheet, this comprehensive array of products includes the revolutionary EcoClean™ finish, Reynobond Face Fastened Solution and Colorweld® 500 finish as well as innovative materials such as the Reynobond Design Line, Anodized Reynobond and Reynobond with KEVLAR®. Alcoa Architectural Products is a business unit of Alcoa, the world’s leading producer of primary and fabricated aluminum as well as the world’s largest miner of bauxite and refiner of alumina. For more information, visit

Duke Energy Center
Please consider the environment before printing these documents.
Arconic Architectural Products Home  |  Sitemap  |  Privacy Policy  |  Legal Notices
Copyright © 2018 Arconic Inc.