Hub piloted mounting system

  • Cap nuts clamp the wheel (see red arrows below)
  • Hub centers the wheel
  • Same stud and cap nut used for entire vehicle (no inner cap nuts)

Single wheel, hub piloted

View single wheel detailed cross section
View wide base wheel (super single) detailed cross section

Dual wheel, hub piloted

View dual wheel detailed cross section

Finish Part Number
Polished Both Sides

Specifications Measurement
Size24.5 x 8.25
Bolt Circle11.25
Hub Bore Diameter8.674
Bolt Hole Diameter1.18
Max. Wheel Load17300
Wheel Weight62
Max. Inflation – cold130
Valve StemTR555D

Accessories & Mounting Hardware Part Number
Front Outer Cap Nuts-
Rear Inner Cap Nuts Al/Al -
Rear Inner Cap Nuts Al/Stl -
Rear Outer Cap Nuts -
Hub Cover System -

Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.

1. Capacity ratings as dual or single in highway service – bias-ply or radial.
2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset).
3. Clean Buff Inside Only finish for products 822627, 84U627. Clean Buff Outside Only finish for products 824627, 834627, 89U637.