Hub piloted mounting system

  • Cap nuts clamp the wheel (see red arrows below)
  • Hub centers the wheel
  • Same stud and cap nut used for entire vehicle (no inner cap nuts)

Single wheel, hub piloted

View single wheel detailed cross section
View wide base wheel (super single) detailed cross section

Dual wheel, hub piloted

View dual wheel detailed cross section

Finish Part Number
Brushed Both Sides
Polished Both Sides
Dura-Flange® Wear Protection
Clean Buff Both Sides as applicable³
Polished Both Sides896523
Clean Buff Both Sides as applicable³896527

Specifications Measurement
Size22.5 x 9.00
Bolt Circle13.189
Hub Bore Diameter11.075
Bolt Hole Diameter1.053
Max. Wheel Load19090
Wheel Weight51
Max. Inflation – cold142
Valve StemMS70-7

Accessories & Mounting Hardware Part Number
Front Outer Cap Nuts -
Rear Inner Cap Nuts Al/Al -
Rear Inner Cap Nuts Al/Stl -
Rear Outer Cap Nuts -
Hub Cover System -

Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.

1. Capacity ratings as dual or single in highway service – bias-ply or radial.
2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset).
3. Clean Buff Inside Only finish for products 822627, 84U627. Clean Buff Outside Only finish for products 824627, 834627, 89U637.